background image

Page 2

SKU 43353

Specifications

Save This  Manual

You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram.  Keep your invoice with this
manual.  Write the invoice number on the inside of the front cover.  Keep the manual and
invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

1.

Keep work area clean.  Cluttered areas invite injuries.

2.

Observe work area conditions.  Do not use machines or power tools in damp or wet

locations.  Don’t expose to rain.  Keep work area well lighted.  Do not use electrically
powered tools in the presence of flammable gases or liquids.

3.

Keep children away.  Children must never be allowed in the work area.  Do not let

them handle machines, tools, or extension cords.

4.

Store idle equipment.  When not in use, tools must be stored in a dry location to

inhibit rust.  Always lock up tools and keep out of reach of children.

5.

Do not force tool.  It will do the job better and more safely at the rate for which it was

intended.  Do not use inappropriate attachments in an attempt to exceed the tool
capacity.

6.

Use the right tool for the job.  Do not attempt to force a small tool or attachment to do

the work of a larger industrial tool. There are certain applications for which this tool
was designed. Do not modify this tool and do not use this tool for a purpose for which
it was not intended.

Rev 11/01

Item

Description

Stock Capacity

40 inches wide; 18 gauge sheet metal

Hold Down Bar

5/8 inch steel

Table  Size

42-5/8 (L) x 4-7/8 (W)

Dies

1, 1-1/2, 2, 4, 7, 10, 15 inches

Roller  Size

1-21/32 (dia.) x 39 (L) inches

Round Stock Grooves 

(3 sizes)

1/4, 5/16, 3/8 inches

Handle Dimensions

30 inches

Zerk Fittings

Automotive

Overall  Dimensions

49 x 15-1/2 x 24 inches

Weight

420 lbs.

Hex Wrenches

5, 6, 8 mm

Summary of Contents for 43353












Reviews: