Page 4
SKU 43353
Roller Machine Safety Precautions
1.
Avoid cuts by always wearing gloves when handling sheet metal.
2.
Keeps hands and clothes out of the path of the rollers.
3.
The Roller Machine should only be used by an experienced operator.
Unpacking
When unpacking, check to make sure the following parts are included:
- Roller Machine
- 7 Dies
- 3 Hex Wrenches
If any parts are missing or broken, please call Harbor Freight Tools at the number on the
cover of this manual as soon as possible. Parts of this machine come coated with a rust
inhibitor. It must be removed before using. Refer to the Maintenance section on page 8.
Operation
The Roller Machine is used for shearing and rolling sheet metal up to 18 gauge. The Roller
Machine comes pre-adjusted from the factory. Before using it, however, check that all the
necessary adjustments are made (Refer to the section on Adjustments).
Pressing
1.
Raise the Lower Braking Die (11) to its highest level by rotating the Handle Arm (18).
2.
Slide the Press Plate Brackets (8) of the Press Plate Assembly (8,9,10,54) into the
receiver holes of the Lower Braking Die (11).
Note that the Press Plate (10) should be facing down.
3.
Raise the Press Plate (10) as necessary by turning the Hex Bolt (54) clockwise.
4.
Place the workpiece so that it is centered under the Press Plate (10).
5.
Rotate the Handle Arm (18) to press the workpiece.
Summary of Contents for 43353
Page 10: ...Page 10 SKU 43353...
Page 11: ...Page 11 SKU 43353 WARRANTY...
