45
CLASSIC EDGE OUTDOOR FURNACE • OWNER'S MANUAL
2. To tighten the latch bearing, loosen the latch adjustment nut; then tap the
latch bearing assembly in toward the firebox. Tighten the latch adjustment
nut securely.
Hinge Adjustment Nuts
Latch
Adjustment
Nut
FIREBOX DOOR SEAL
The firebox door seal must be in good condition to ensure an airtight seal.
If the outdoor furnace is operated with the door open or ajar, the firebox
door seal may become damaged or brittle due to excessive temperatures. If
replacement is necessary, use the following procedure:
Remove all wood, coals and ash from the firebox.
1. Disconnect power to the outdoor furnace.
Do not proceed without testing that power is disconnected. Make sure the power
cannot be reconnected while testing components (i.e., use lock out, tag out).
2. Using a scraper, remove the firebox door seal on the inner side of the
firebox door and clean any remaining silicone adhesive from the groove.
Any residue left in the groove will interfere with the new silicone seal.
3. Apply a liberal amount of silicone sealant into the entire firebox door seal
groove.
4. Starting at the center of the hinge side of the firebox door, insert the new
silicone seal into the groove, pressing it firmly into the bead of silicone
sealant. Make sure the seal is not stretched as it is pressed into the corners.
Force the seal out to fill in the corners as shown.
