CentoLight Lightblaster 200, User Manual

Page: 12 / 32

12 12
Lightblaster 200 User Manual
Eng
6 - M
enu
o
PeraTion
By pressing MENU button, the display will cycle through 12 different menus. Press
ENTER button to enter the corresponding menu, press UP or DOWN to modify cur-
rent parameter value. Then, press ENTER button again to save current value.
No. Menu Function
1 d001-d512 DMX 4 channel mode. Adjusts DMX512 address from 001 to 512.
2 A001-A512 DMX 8 channel mode. Adjusts DMX512 address from 001 to 512.
3 r000-r255 Warm White 1 brightness adjustment from dark to maximum brightness
4 g000-g255 Pure White 1 brightness adjustment from dark to maximum brightness
5 b000-b255 Warm White 2 brightness adjustment from dark to maximum brightness
6 u000-u255 Pure White 2 brightness adjustment from dark to maximum brightness
7 FH01-FH99 Strobe effect from slow to fast
8 CL01-CL12 Manual Color Selection
9 CC01-CC99 Jump change, from slow to fast
10 dE00-dE99 Gradual change, from slow to fast
11 CP00-CP99 Pulse change, from slow to fast
12 SOU1-SOU9 Sound Control, microphone sensitivity from low to high
6.1. Set DMX Address
When selecting a starting DMX address, always consider the number of DMX chan-
nels. If you choose a starting address that is too high, you could restrict the access
to some of the product’s channels. Lightblaster 200 uses 4 DMX channels or 8 DMX
channel (according to the DMX mode chosen), which defines the highest configu-
rable address to 509 or 505 to have all channels controllable.
Set the Lightblaster 200 starting address in the 001 - 509 DMX range to enable
control of up to 128 blinders in the 4-channel control mode. Set the Lightblaster 200
starting address in the 001 - 505 DMX range to enable control of up to 64 blinders
in the 8-channel control mode.
6.2. DMX Channel Assignments and Values
When use DMX control , the system takes 4 or 8 channels (depending on selected
DMX mode. Below you can see the channel assignments for both modes.
1) 4-ch DMX512 Channel Chart
CH Function Description
CH1 WW1 Dimmer 0-255 : Warm White 1 Linear Dimming , from Dark to Bright.
CH2 PW1 Dimmer 0-255 : Pure White 1 Linear Dimming, from Dark to Bright.
CH3 WW2 Dimmer 0-255 : Warm White 2 Linear Dimming , from Dark to Bright.
CH4 PW2 Dimmer 0-255 : Pure White 2 Linear Dimming, from Dark to Bright.