7
7
Lightblaster 200 User Manual
Eng
y
The unit can not be used near water; for example near a bathtub, a kitchen sink,
a swimming pool, etc.
3.3. Heat
y
Do not use in a confined space. Always install the product in a location with
adequate ventilation, at least 20in (50 cm) from adjacent surfaces. Be sure that
no ventilation slots on the product’s housing are blocked.
y
The apparatus should be located away from heat sources such as radiators,
stoves or other appliances that produce heat.
Don not use it when maximum ambient temperature is higher than 50°C. Work
temperature ranges from -20°C to 40°C (-4°F to 104°F).
3.4. Servicing
y
Do not implement any servicing other than those means described in the man-
ual. Refer all servicing to qualified service personnel only. The internal compo-
nents of the equipment must be purchased from the manufacturer. Only use
accessories/attachments or parts recommended by the manufacturer.
4 - i
nTroduCTion
The Lightblaster Blinder series by Centolight combine the traditional advantages of
LED technology (energy saving, reliability and durability) with the additional ad-
vantages offered by COB (Chip On Board) technology, such as the high amount of
Lux, excellent thermal dissipation and the possibility of creating areas with different
color temperatures on the same chip.
The light source consists of 2 LEDs of 100W each with 2 zones of 50W each, re-
spectively, warm white (about 3200°K) and cool white (about 6500°K). The mix of
the two colors (manually adjustable or via DMX) allows you to obtain whites with
temperatures chosen according to the place of installation.
The 16-bit DMX control is extremely accurate and flicker-free, allowing the use of
these blinders even during video shooting.
The steel housing is extremely robust and is designed to facilitate heat dissipation.
The processor controls the fan speed to minimize fan noise based on the internal
temperature.
4.1. Features
y
2x 100W COB Led chips
