CEMO DT-Mobil Easy 200 L, Original Operating Instructions

Page: 14 / 80

14
GB
3. Layout
a
Ventilation valve
b
Filling opening
c
Delivery line ball valve
d
Hand pump
e
Lever hand pump
f
Delivery nozzle
g
Delivery hose
DT-Mobil Easy 200 l hand pump
6
1
2
7
5
3
4
Labelling of 200 l tank at front
A
B
UN 1202 (for diesel)
Hazard label
A
B
2. Unscrew cap from the filling opening and check
the inside of the tank for contamination (clean
as necessary, e.g. with a vacuum cleaner).
3. Fill tank (see 5.4, point 2)
i
Important!
Please always use an automatic delivery
nozzle to avoid overflows.
4. Perform a test filling as described in section
5.5, but hold the delivery nozzle in the still
open filling opening.
5. Close the filling open tightly again with the cap.
The filling station is now ready for operation.
4. Using the equipment
for the first time
1. The stickers enclosed with the tank documents
must be permanently affixed to the front side.
5. Operation
5.1 Storage
Attention!
Material damage (deformation) of
the tank from excessive heating or
mechanical overload.
• Do not expose the high-grade plastic tank to
direct sunlight for extended periods either during
transport on the vehicle or when in storage.
Suitable storage conditions:
• ambient temperature: -10 °C to +40 °C
(cover or take other suitable measures
when storing outdoors)
• floor: level and smooth
(without pointed projections)
• stackability:
max. two empty or filled tanks on top
of each other
i
Important!
When stacking:
- The lid must be closed, and the
two locking bolts
h
must be engaged.
- For fixing, the four locking cams
i
on the top
of the lid must click into the four recesses
on the underside of the tank.
9
8