4
Ø 7 ÷ 33 mm
310 rpm
110 / 120 V AC-DC
1800 W
14 kg
17 kg
Ø 7 ÷ 40 mm
250 - 280 rpm (**)
220 / 230 V -50 Hz
LD-2E
LD-2E-110
LD-4EF
see
"APPENDIX C"
page 29
(*) with broach cutters on thicknesses up to 50 mm
with special spiral bits on thicknesses up to 45 mm
(**) Two speeds: 280 rpm with broach cutters and spiral bits diameter smaller than 28 mm;
250 rpm with broach cutters diameter between 28 to 40 mm inclusive.
see
"APPENDIX B"
page 28
Drilling capacity (*):
Speed without load:
Electric motor:
Supply:
Power rating:
Automatic switch:
Weight:
Weight with "DBG-F2":
Recommended
gear sump oil:
Air Noise:
(Directive 2006/42/EC
annexe 1, point 1.7.4.2
letter "u")
Vibrations:
(Directive 2006/42/EC
annexe 1, point 2.2.1.1)
1. GENERAL CHARACTERISTICS
Ø 7 ÷ 33 mm
310 rpm
220 / 230 V - 50 Hz
Single phase, double insulation
protection against overheating caused by a current overload
and against unintentional start up following a drop in voltage, by
means of an automatic switch equipped with thermal cut-out
and underpower relay.
MOBIL DTE OIL LIGHT or ESSO TERESSO 32
or equivalent
