background image

9

1.1)  Compliance of use

- The 

B68M..-RC1

 

pump is designed to activate hydraulic heads for cutting conductor cables or 

  for crimping electrical cable lugs. 
-

  The main use of the pump is combined with specifi c cutting heads to safely cut Copper and 

  Aluminium cable where the absence of voltage cannot be guaranteed. 

-  The dielectric oil used within the pump has special properties which insulate the pump from 
  the cutting head in the event that a live cable is accidentally cut. 
-  The innovative radio remote control is designed specifi cally for use within manholes allowing 
  the operator to control and operate the pump outside of the manhole at a safe distance away 
  from the cutting operation. 

 

In order to trace all of the components of each complete unit, such as: pump, radio 

   

 

control, the user should check the identifi cation number reported on the tag attached 

   

 

to each item.

1.2) Description 

B68M....-RC1 

includes the following (Ref. to Fig. 1):



(A) Canvas bag: 

made from sturdy fabric, allows users to store the pump and accessories.



(

B) Battery charger

: for recharging the batteries supplied; has “AIR COOLED” charging technol-

  ogy and a processor for managing charging cycles.
  To use, carefully follow the instructions in the battery charger user manual. 



(C) USB cable: 

for transferring the data stored on the internal memory card to a PC.



(D) Rechargeable battery 

(2 pcs): 18 V - 7.0 Ah high capacity Lithium Ion battery. 

  Provides 100% of its energy b5 and +122 °F (-15 and +50 °C).
  Electronic control of the individual cells to prevent over-charging and under-discharging.
  Greater longevity and ventilated recharging in short times thanks to AIR COOLED technology. 
  Timed automatic power off  to optimize energy consumption.
  Equipped with LED indicators that indicate the remaining battery life at any time by pressing 
  the button (P) (Ref. to Fig. 3):
  4 LEDs illuminated: fully charged
  2 LEDs illuminated: 50 % capacity
  1 LED  flashing: minimum charge, replace the battery.

Summary of Contents for B68RC3-120





























Reviews: