TIMER
You must set the time prior to programming the Timer. To do this turn; the outer dial of the Timer in a
clockwise direction until the time of the day (24-hour clock) corresponds with the triangular marking.
Example if it is 2pm (1400 hours) then set the triangular mark in line with 14. One complete turn of the
dial corresponds to 24 hours.
There are 96
“riders”, positioned around the dial, each rider represents 15 minutes.
Where all the
“riders” are pushed to the outside of the Timer the heater will be ON continuously.
To set a specific time for example:
If you want the heater to be on from 6pm to 10pm, then set all the riders from 18 to 22 (1800 hours to
2200 hours) to the outside of the rim and all other riders to the inside of the Timer. The unit will then
turn on automatically at 6pm and off again at 10pm.
WARNING: Take care in positioning your heater. Using the Timer will mean the heater will come on
automatically. Fire may result if the heater has been placed next to combustible material.
Indicates actual time
Riders pushed to
the outside rim to
turn ON
CARE AND CLEANING
The heater requires regular cleaning to ensure trouble free operation:
Unplug the heater from the mains supply before cleaning.
Ensure that the heater has been allowed to cool down completely before cleaning.
Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and dirt.
Never use solutions such as benzene, thinners or polishing agents.
Use a vacuum cleaner to remove dust and fluff from around the grills and fins.
Ensure the heater is dry before plugging back into the mains supply.
Do not attempt to dismantle the heater. There are no user serviceable parts. For service or repair,
contact an authorised electrical service technician.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase.
TECHNICAL SPECIFICATION
Model No:
CELOH15TM
Supply:
220-240VAC 50Hz
Wattage:
1500W
