OPERATING YOUR OIL COLUMN HEATER
Always choose a safe location for the heater, keeping in mind the safety precautions outlined. Ensure
all packaging has been removed from the unit before use. This appliance requires no installation, it
should be used solely as a portable appliance.
PLEASE NOTE: As this product is fitted with a Timer, the Timer has been set to the
“ON”
position. Please refer to the Timer section for setting instructions.
HEAT CONTROL SWITCH
The control switch positions are:
●
Minimum heating
●●
Medium heating
●●● Maximum heating
Check that the power On/Off switch is set to Off position before plugging the heater into the mains
supply. For greater economy, use the High Heat setting initially and then switch to the Low Heat
setting.
THERMOSTAT
Turn the thermostat knob clockwise until you reach the maximum temperature on the graduated
scale. When the desired room temperature is reached, slowly turn the knob anti-clockwise until the
heater turns off (you will hear a click). The heater will now cycle on and off to maintain the set
temperature.
IMPORTANT! NEVER COVER THIS HEATER
SAFETY DEVICES
This appliance has three protection devices:
The first device will automatically turn the appliance off if the appliance is not in the appropriate
operating position.
The second device automatically disconnects & reconnects the appliance at a pre-set temperature.
The third device disconnects the appliance permanently in case of overheating, by means of a
thermal fuse (it is non resettable).
WARNING: Keep all objects at least 1 metre from the front, sides and rear of the appliance.
WARNING: Do not use this heater with a programmer, separate Timer, remote-control system or any
other device that switches the heater on automatically.
CAUTION: The heater generates heat during use. Proper precautions must be taken to prevent the
risk of burns, scalds, fires or other damage to persons.
