ENGLISH - 25
ENGLISH - 26
Federal Communications Commission (FCC) Statement
Industry Canada (IC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the
user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC/
IC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures :
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules and Industry Canada licence-exempt RSS standard(s)
Operation is subject to the following two conditions :
1)This device may not cause interference and
2)This device must accept any interference, including interference that may cause undesired operation of the device.
FCC/IC RF Radiation Exposure Statement :
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. End users must follow
the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
INSTRUCTIONS FOR THE DISPOSAL OF APPLIANCES FOR DOMESTIC USERS
(Applicable in countries in the European Union and those with separate waste collection systems)
This mark on the product or documentation indicates that this product must not be disposed of with other household waste at
the end of its life. To avoid any damage to health or the environment due to improper disposal of waste, the user must separate
this product from other types of waste and recycle it in a responsible manner to promote the sustainable re-use of the material
resources.
Domestic users should contact the dealer where they purchased the product or the local government office for all the information
regarding separate waste collection and recycling for this type of product. Corporate users should contact the supplier and verify
the terms and conditions in the purchase contract. This product must not be mixed with other commercial waste.
This product has a battery than cannot be replaced by the user. Do not attempt to open the device to remove the battery as this
could cause malfunctions and seriously damage the product. When disposing of the product, please contact the local waste dis-
posal authority to remove the battery. The battery inside the device was designed to be able to be used during the entire life cycle
of the product
Hereby, Cellular Italia S.p.A declares that the radio equipment type BTF8 (Interphone Edge) is in compliance with Directive
2014/53/EU and Directive ROHS (2011/65/EU). The user is prohibited from making any type of change or variation to the device.
Variations or changes not expressly approved by Cellular Italia S.p.A will cancel the user’s authorisation to use the device.
Only update with software provided by Cellular Italia S.p.A.
Bluetooth® is a trademark owned by Bluetooth SIG, Inc.
The full text of the EU declaration of conformity is available at the following internet address: http://www.cellularline.com/it_it/
dichiarazione-conformita/
Technical Specifications
Bluetooth® compliance:
Bluetooth® V.3.0 - Class II
Supported Bluetooth® profiles:
HFP
A2DP
AVRCP
Dimensions mm:
60x80x30
Weight:
44g
Range:
Up to 10 metres
Talk time:
12h
Stand-by time:
700h
Charging time:
3h
Battery type:
Rechargeable Li-ion
Important information
IMPORTANT INFORMATION ON THE PRODUCT BATTERY
Do not store the device without charging it. Failure to do so may irreversibly damage the
capacity of the battery. Recharge the battery completely every TWO months.
IMPORTANT INFORMATION ON PRODUCT WATERPROOFING
The external unit (control unit) is classified IP67 as per the IEC60529 standard. Therefore,
the control unit may be submerged in a meter of freshwater for a maximum of 30 (thirty)
minutes.
Despite this classification, the device is not immune to greater stresses, such as prolonged
immersion or high-pressure jets of water.
Using the device in conditions of bad weather, at high speeds, may be equivalent to
subjecting it to a high-pressure jet of water.
FOLLOW THESE SUGGESTIONS CAREFULLY TO PREVENT DAMAGE TO THE DEVICE:
Do not immerse the device in freshwater over one metre deep for more than
30 minutes
.
Do not store the device when it is wet: dry it with a clean, soft cloth.
Keep the device away from salt water, ionised water, beverages and other
liquids. If the device is exposed to liquids other than freshwater, wash it with
cold, freshwater and dry it carefully with a clean, soft cloth.
Keep the device away from high-pressure jets of water.
SAR is measured with the device at 0 mm to the body, while transmitting at the highest
certified output power level in all frequency bands of the device. The maximum SAR value
is 1.75 W/kg (head/body) averaged over 10 gram of tissue.
WARNING: To prevent possible hearing damage, do not listen at high volume levels
for long periods.
Summary of Contents for Interphone EDGE
Page 1: ...USER MANUAL...
