Cellularline Interphone EDGE, User Manual

Page: 9 / 13

ENGLISH - 17 ENGLISH - 18
5 – Phone/GPS
EDGE can be used together with Bluetooth® devices, as mobile phones, GPS devices, MP3
players.
To each EDGE unit is possible to connect, in the same time, max two Bluetooth® devices,
except when an INTERCOM conference is active with three or four units (as described at
chapters 4.3 / 4.4).
5.1 Pairing
Before using the EDGE unit with these devices, is necessary to run the pairing procedure.
This is necessary only once, after EDGE will automatically recognize and connect devices
already paired.
Pairing procedure
1. Start Bluetooth® service on mobile phone / GPS / MP3 player (check the device’s
user guide for more details).
2. With EDGE in Standby mode (led BLUE (6) flashing), press UP (2) button and then
press MFB (1) button to activate “SETUP” menu. Press UP (2) button twice, EDGE
will enter in “PAIRING MODE” .
3. Start searching for new Bluetooth® devices on mobile phone / GPS / MP3 player.
4. After few moments the device in searching mode will list “Interphone EDGE”. Select
it.
5. If prompted for a PIN number, type “0000” (four times the zero number).
6. EDGE vocal guide will confirm the successful pairing with the message “PAIRING
SUCCESSFUL, CONNECTED TO PHONE”. EDGE will go in Standby mode, the led BLUE
(6) will flash twice, every three seconds.
7. If the Bluetooth® device ask authorization to phonebook access, confirm.
If you want to pair a second device, repeat the pairing procedure from step 1).
4.6 Intercom tips
Once activated the intercom channel, communication remains active until it is manually
stopped by the rider. It is suggested to suspend the intercom conversation, if not necessary,
to optimize battery life.
During the conference with three/four riders, in order to ensure the best system stability,
it is suggested to don’t connect other Bluetooth ® devices (phones, GPS, etc..) to the units.
The best behavior of the group conference is guarantee only using Interphone branded
intercom units.
“INTERCOM” audio quality is strongly influenced by:
● proper installation of speakers and microphone inside the helmet. Always check
very carefully that speakers are placed exactly on your ears, and microphone is
placed as close as possible to your mouth. Any error on these positions will cause
an important decrease of performances.
● environment (electromagnetic interference, natural obstacles, etc.).
● aerodynamic protection of your motorcycle.
● type of helmet used.