6
Adjusting the Volume
Increase or decrease the volume by turning the Volume Control button (1) until the desired
level is reached. When the maximum volume is reached, “Maximum Volume” will be an-
nounced on the kit.
Transferring the audio from phone to kit
Press and hold the Volume Control button (1) for 3 seconds and the audio will automatically
be transferred to the handsfree kit.
Transfer the audio from kit to phone
Press and hold the Volume Control button (1) for 3 seconds and the audio will automatically
be transferred to the phone.
Advanced functions
Music streaming (A2DP)
If your phone supports A2DP (Advance Audio Distribution Profile), you can stream music
from your phone to the SUPERTOOTH HD.
To stream music and Play/Pause:
Go to your phone’s music player and play a track via A/V Bluetooth. (See the manual for your
phone). Your music will be played through the SUPERTOOTH HD.
To adjust the Volume:
Increase or decrease the volume by turning the Volume Control button (1) until the desired
level is reached.
Note:
If you receive an incoming call while listening to music, the streaming will automatically be paused,
muted or stopped until you end or refuse the call. During the call, conversation will take place through
the handsfree kit. On some phones, when the call ends or is refused, you must restart the music manually.
Listening to navigation instructions from the GPS navigator in a Smartphone (A2DP)
If your phone supports A2DP (Advance Audio Distribution Profile) and has an internal GPS
navigator, you can listen to its navigation instructions on the SUPERTOOTH HD. Please see
the user manual for your phone.
To adjust the Volume:
Increase or decrease the volume by turning the Volume Control button (1) until the desired
level is reached.
Note:
If you receive an incoming call while listening to navigation instructions, streaming will automa-
tically be stopped until you end or refuse the call. During the call, conversation will take place through
the handsfree kit. On some phones, when the call ends or is refused, you must restart the navigation
on the phone manually.
Three-way calling
IMPORTANT:
Before using this feature, make sure your phone and the phone network sup-
port call waiting
If you receive a call during an ongoing call, a low beep will be heard from the SUPERTOOTH
HD.
To end the current call and accept the incoming call:
Briefly press the Volume Control button (1). The current call will be ended and the second
call accepted. The second call will automatically be heard through the handsfree kit.
To place the current call on hold and accept the incoming call:
Press the Volume Control button (1) twice quickly, which will place the current call on hold and
answer the second call. The second call will automatically be heard through the handsfree kit.
To swap the current call with the held call:
Press the Volume Control button (1) twice quickly, which will automatically put the current
call on hold and activate the call that has been on hold. The activated held call will be heard
through the handsfree kit.
Note:
On some phones, you must go to the phone call menu before swapping the current call with
the held call.
To end the current call and activate the held call:
Press the Volume Control button (1) briefly, which will end the current call and activate the
held call. The activated held call will automatically be heard through the handsfree kit.
Note:
On some phones, you must press the Volume Control button (1) twice quickly to activate the
held call.
Multipoint
The SUPERTOOTH HD can simultaneously connect to 2 Bluetooth devices, in which case the
SUPERTOOTH HD will be active on both mobile phones. User actions (voice dialing, redia-
ling) will control the primary phone, but an incoming call on either phone can be accepted
or refused from the SUPERTOOTH HD.
Multi-Point Pairing Procedure:
Turn off the handsfree kit by pressing the On/Off button (7) until the LED flashes red.
Pair the additional phone as described at point 2. Pair an additional phone in section 5. This
phone will now be the primary phone.
Then, connect the 1st phone manually after the 2nd phone has been successfully paired.
Using Multi-Point:
See 2. Basic operations in section 9.
Note:
Voice dialing and re-dialing can be done with the primary phone only.
You can accept, refuse or ignore calls from either phone.
When you have an ongoing call on the 1st phone and you receive a call on the 2nd phone,
you will hear a special ringtone during the ongoing call.
