29
4. Summary of SMS Commands
In the table below, XXXX is a four digit user password.
Modes and Functions
Description
Command
Explanation or Default SMS
Switch to Away Mode
$XXXXA
Away Mode Group A/Group B
Switch to Stay Mode
$XXXXS
Stay Mode Group A/Group B
Switch to Off Mode
$XXXXO
System Off Mode Group A/Group B
Switch to Monitor Mode
$XXXXM
Monitor Mode Group A/Group B
Silent Panic
$XXXXH
Silent Panic Group A/Group B
Panic
$XXXXP
Panic Group A/Group B
Reset E12
$XXXXr
Reset Group A/Group B
Trigger Gas discharge
$XXXXG9
Gas Triggered
Switch Output 1 On
$XXXXB1
Output 1 On
Switch Output 1 Off
$XXXXB0
Output 1 Off
Pulse Output 1
$XXXXB9
Output 1 pulse (Switch On and Off)
Switch Output 2 On
$XXXXC1
Output 1 On
Switch Output 2 Off
$XXXXC0
Output 1 Off
Pulse Output 2
$XXXXC9
Output 1 pulse (Switch On and Off)
Switch Output 3 On
$XXXXD1
Output 1 On
Switch Output 3 Off
$XXXXD0
Output 1 Off
Pulse Output 3
$XXXXD9
Output 1 pulse (Switch On and Off)
Switch Output 4 On
$XXXXE1
Output 1 On
Switch Output 4 Off
$XXXXE0
Output 1 Off
Pulse Output 4
$XXXXE9
Output 1 pulse (Switch On and Off)
Enable/Disable fun Information requests
Enable Gas discharge
$XXXXG1
Auto Gas Enabled
Disable Gas discharge
$XXXXG0
Auto Gas Disabled
Disable 24 hr test signal
$XXXXV
Disable 24 H
Enable Seismic detector
$XXXXp
Seismic Detector On
Disable Seismic detector
$XXXXq
Seismic detector Off
Request signal strength
$XXXXT
/31 Signal Strength
Request alarm panel time
$XXXXt
Unit will reply with its current time and date setting
Request Timer Settings
$XXXX*
All timer settings will be sent to the requesting Cell
phone
Request Base and SMSC numbers
$XXXXI
Base station and SMSC numbers will be given
Request Cell numbers
$XXXXJ
All 4 programmed cell numbers will be given
Status request
$XXXXL
Status of alarm/Mains power/Battery
Request zone setup
$XXXXs
Reports the zone setup for the different modes
Set Outputs as Telemetry outputs $XXXX)
See
Section
1.5
Set Outputs as SMS outputs
$XXXX(
See Section 1.5
Disable SMS sending in Monitor- +
Stay mode
$XXXX>
No SMS’s will be sent when panel is in monitor or
stay mode
Enable SMS sending in Monitor- +
Stay mode
$XXXX<
All SMS’s will be sent when panel is in monitor or
stay mode
Table 3.
Summary of SMS Commands.
