www.cellarcool.com | Page 9
INSTALLING THE ACH 550 HUMIDIFIER
4. Raise the Humidifier to the installation location, align the rear key holes
with the mounting screws and mount the unit.
3. Remove the top access panel.
Note:
The bottom of the unit needs to be installed no less
than 3 feet from the floor.
Note:
The Humidifier is designed to be mounted with Drywall Anchors.
1. Mark the location in which the two screws will be
installed. Make sure the screws are installed level on
the wall.
2. Install the supplied two 2” #8
Hex Head Screws into the marked
mounting screw locations leaving 1/8”
between the wall surface and screw
head.
1/8”
WALL
5. Use a 1/4” wrench or socket to tighten the accessible mounting screws.
6. Reinstall the top access panel.
