www.cellarcool.com | Page 5
Receiving and Inspecting the System
•
Lift only at the designated hand hold locations on the shipping container or fully support the unit from
underneath. A shipment may include one or more boxes containing accessories.
•
Before opening the container, inspect the packaging for any obvious signs of damage or mishandling.
•
Write any discrepancy or visual damage on the Bill of Lading before signing.
Note:
CellarCool units are manufactured in the USA and tested prior to shipment.
Review the Packing Slip to Verify Contents
•
Check the model number to ensure it is correct.
•
Check that all factory options ordered are listed.
If any items listed on the packing slip do not match your order information,
contact CellarCool Customer Service immediately.
Check the Box for the following contents:
RECEIVING & INSPECTING THE SYSTEM
Please leave the unit in its original box until you are ready for installation. This will allow you to move the product
safely without damaging it. When you are ready to remove the product from the box, refer to the installation
instructions.
TIP:
Save your box and all packaging materials. They provide the only safe means of transporting/shipping the unit.
(1) ACH 550 Humidifier
(4) 2” #8 Hex Head Screws
(1) 10 FT. 1/2”Drain Line
(1) ACH 550 Owner’s Manual
(1) Humidistat w/25’ of Cable
(1) 90° Barb Fitting
Main Humidifier Box
