Celco Spider67, Manual

Page: 7 / 68

General information
2020/7/V1.0 7 | 69 Manual-No.: 10001_hdb_en
1.3 Required and supplementary documentation
The following table contains necessary and supplementary documentation for the installation and
commissioning of the unit.
Document type Description Document no.

Operation instruction The operating instruction is supplied
with the device or can be found at
www.elco-automation.de

Datasheet The data sheet contains the
permissible data. You can find the
data sheet as a chapter in the manual
or at: www.elco-automation.de

Handbuch The current manual can be found at
www.elco-automation.de
Tabelle 1: Requirement for commissioning the unit
Requirement for commissioning

The documents marked with the book symbol are available.
1. You have read and understood the documentation.
2. Only then you will put the unit into operation.
1.4 Explanation of symbols and spelling
For safe working on and with the product, Elco instructions contain standardised safety and handling
instructions, signal words and symbols in accordance with DIN EN ISO 7010. The structure of the
safety and handling instructions as well as the signal words and symbols are then explained.
1.4.1 Signal words
DANGER
This signal word indicates a high-risk hazard. If it is not avoided, it will result
in death or injury.
WARNING
This signal word indicates a medium risk hazard. If it is not avoided, it can
result in death or injury.
CAUTION
This signal word indicates a low-risk hazard. If it is not avoided, it can result
in minor or moderate injury.
ATTENTION
This signal word indicates a risk of damage to the product or machine due to
incorrect use. It also warns of environmental damage.