Ceice TS-1030 Instructions For Use Manual Download Page 13

12

parameter settings

The following is the advanced parameter setting method and function profile, do not tamper with

- -

Please change the settings under the guidance of professionals

- -

Pressing the "set" key items. Press "▲" or "▼" key to adjust the value, the interface is adjusted to be automatically returned to save settings, can also press the "Settings" button for 3 

seconds to save and exit

hardness

- -

See page 6 "

 Ice cream hardness adjustment

 "

See page 6 "

 Ice cream hardness adjustment

 "

See page 6 "

 Ice cream hardness adjustment

 "

Automatic cooling interval

- -

Cooling time between starts automatic mode, the default value of 5 (minutes)

The air pump running time

- -

See page 7 "

 The method of operation to ensure the quality of ice cream

 "The default value of 2.0 (seconds)

See page 7 "

 The method of operation to ensure the quality of ice cream

 "The default value of 2.0 (seconds)

See page 7 "

 The method of operation to ensure the quality of ice cream

 "The default value of 2.0 (seconds)

Low Voltage Protection Switch

- -

If you need to use the device at a low voltage environment, close protection. Close long-term low-voltage protection device will affect the warranty, the default open

Freezing cylinder temperature alarm

- -

Freezing cylinder temperature alarm is triggered, the default value of 15 (degrees)

Key-lock function switch

- -

This function will then turn the key in the lock idle one minute, the screen flashes "L" pattern, press "▲" and "▼" key to unlock, the default OFF

Screen brightness

- -

Select the screen brightness, default brightness

Shut warning / recovery value

- -

Lack of material parameters for the calibration reminder function, a default value 500/300

Summary of Contents for TS-1030














Reviews: