www.cegasa.com Page -15-
User Manual R10
–
First steps
–
On the last eBick module, fit the bus termination resistor on the connector that is
free.
8. Power connection between modules; First check to see if the installation is in
series or parallel and make sure to use PPE (protective gloves and safety
glasses)
8.1 Parallel connection (voltage 48V) - For eBick P cases (Anderson 350)
✓
Without connecting to the MCP (leave this until last) start connecting all the
power connectors between columns; If there are several columns, use the
PARALLEL POWER CABLE EXTENDER KIT at the rear.
✓
Use the supplied protective cap to protect the power connector left
uncovered on the last eBick module.
BUS termination resistor
POWER EXTENDER KIT
PARALLEL
Anderson connector
SB350
Summary of Contents for eBick MCP Series
Page 1: ...USER MANUAL FIRST STEPS...
Page 2: ...www cegasa com...
