Cedar DNS3000, Manual, Page: 29 / 44

CEDAR DNS3000 dialogue noise suppressor
25
Scan IP
Allows the user to enter the IP address of a DNS3000 not on a local network, or that is on such
a large local network that 'Scan All' would take too long to find it. You may then make the unit
available from this Mac/PC by selecting it and moving it to the 'Registered DNS Units' list –
either by selecting it and using the >> button, or by double-clicking.
Unregistering a DNS3000
You may unregister a DNS3000 by pressing the << button. A DNS3000 cannot be unregistered
while Pro Tools is running, because it may be in use.
DNS3000 Settings Loader
This application allows backing up and restoring of snapshot and presets. You may run it directly
from:
Windows: Start/All Programs/CEDAR Audio Ltd/Pro Tools/DNS
OSX: Applications/CEDAR
Backing up
■
Select Backup settings.
■
Select the DNS3000 whose settings you wish to save. Click on Next.
■
Choose a destination folder and filename. Click on Next.
■
Choose whether you wish to save the unit’s presets, snapshots, or both. Click on Next.
Once the operation is complete, the application will tell you that the DNS3000’s settings have
been backed up successfully.
Restoring
■
Select Restore settings.
■
Select the DNS3000 to which you wish to restore the settings. Click on Next.
■
Choose a source folder and filename. Click on Next.
■
Choose whether you wish to restore the unit’s presets, snapshots, or both. Click on Next.
Once the operation is complete, the application will tell you that the DNS3000’s settings have
been restored successfully.