Cedar DNS3000, Manual, Page: 10 / 44

CEDAR DNS3000 dialogue noise suppressor
6
Front Panel Indicators and Controls
Power
■
Power on/off button
Press this to switch the DNS3000 on, and hold it to switch the unit off.
If you switch off using the rear panel switch without first powering down using the soft power
button, you risk corrupting the internal memory of the unit.
Channel Selection
■
Channel Selectors
The channel selection buttons select which processing channel(s) is/are connected to the
process controls.
■
When the CHAN1 button is lit, the process controls affect the processing on channel 1.
■
When the CHAN2 button is lit, the process controls affect the processing on channel 2.
■
You can apply the same settings to both channels by pressing CHAN1 and CHAN2
together (or in quick succession).
Process Controls
■
Process Off button
Switch processing on and off.