cecotec CONGA WINROBOT 870, Instruction Manual

Page: 8 / 15

ENGLISH
18 CONGA WINROBOT 870
- The user can recover the device by pulling from the safety rope. Pull lightly from the safety
rope at an angle close to the glass to prevent it from dropping.
Please, make sure the battery is fully charged (green light ON) before use
- Turn off the power switch on the device and plug it to the power supply. An orange light
turns on while charging.
- The green light turns on when fully charged.
Table-cleaning mode
- Put the device on the table and select the auto-cleaning mode, the device will use the table-
cleaning mode.
Notice
- For your safety, do not use the device on frameless widows.
- Make sure the cleaning ring is properly placed on the cleaning wheel to avoid leakage.
- For your safety, do not use in rainy or moist days.
- Set a danger-warning area downstairs for no-balcony windows and doors.
LED SIGNALS
The vacuum cleaner robot has been equipped with 3 indicator lights
with different functions:
· The first light, to the left, signals the state of the battery. When the
battery is low, incomplete, or charging, the light will turn red. When
the robot is fully charged, the light will turn blue.
· The second light is in the centre and signals when the robot starts cleaning. This light turns on
once the robot is already attached to the window and starts a cleaning mode. When the robot
is cleaning, the light will turn blue and blink.
· The third right, to the right, signals when the robot is in Stop/Pause mode. This light turns on
when the robot is attached to the window without cleaning, when the robot is in Stop/Pause
mode, or when the robot finishes the cleaning mode and stops. The light will turn red and blink.
EXAMPLES:
1. Low battery (Red 1)
2. Fully charged (Blue 1)
3. Low battery and robot in Stop/Pause mode
(Red 1 and blinking red 3)
4. Fully charged and robot in Stop/Pause mode (Blue 1 and blinking red 3)