cecotec CONGA WINROBOT 870, Instruction Manual

Page: 7 / 15

ENGLISH
17 CONGA WINROBOT 870
• Input voltage: 100~240 VAC, 50~60 Hz.
• Lithium-Ion battery: 500 mAh / 14.8 V.
• Charging time: 1.5 h.
• Dimensions: 28x14x12 cm. Weight (N.W/G.W): 0.95 Kg / 1.4 Kg).
GETTING TO KNOW THE DEVICE
1. Remote signal receiver
2. Vent
3. Power switch
4. DC power jack
5.
Hole for the safety rope
6. Indicator light
7. Buzzer
8. Easy-grip handle
Conga WinRobot 870 must always be connected with the power cord for normal use.
How to put the device on the window
- Turn on the power switch and make sure the fan is running.
- Put the device on the window, 10cm away from the frame.
- Check if the device sticks to the glass before releasing it.
How to take the device from the window
- Press Stop in the remote control.
- While the device is running, please hold the safety rope with one hand and take the device
from the window with the other hand.
- Turn off the power switch in a safe area.
Safety rope
- Check if the safety rope is broken or the knot is loose before use.
- Fasten the safety rope and tie it to an indoor fixture before use.
UPS (Uninterrupted Power System) function
- The boto must always be connected to the mains supply.
- The UPS function will be enabled automatically when no electric power is supplied. The
backup time of this system is 30 minutes.
- If no electric power is supplied, the device will stop automatically, emit an alarm, and flash a
red light. The user must take the device from the window as soon as possible.