65/109
3301065/A
Block one end of connection FA, by fixing the tab FB to the machine base (see Fig. 3). Connect the connection to the
power source (see Fig. 4).
FA
FB
Fig.3
Fig.4
Connect the other end of connection BA to the wire feeder (see Fig. 5). Avoid creating coils in order to minimise the
inductive effect of the cable.
Connect the coolant hoses to the quick-fitting valves located below the base of the wire feeder (see Fig. 6), by
observing the colour coding on the front side.
Fig.5
Fig.6
