Product Details
2] INFORMATION & RECOMMENDATIONS
Power Considerations
The handle is designed to house electromagnets
with a holding force of 300Kg each. These units can be
supplied by either 12Vdc or 24Vdc depending upon your
preferred choice (48Vdc supplied on special request).
The current required depends on the amount of
electromagnetic locks, and the voltage chosen – please
see Technical Specifi cation, and ensure you have allocated
suffi cient power to BO600RH (2500mm housing with 2
magnetic locks) would require: PSU12/2 or ARD2/12 at
12Vdc PSU24/1 or ARD24 at 24Vdc.
Information
The electromagnets are pre-fi tted within the lock section.
The armature plates are pre-fi tted within the architectural
handle. Both sections are supplied with end caps.
Wiring
Plan your cable routes before commencing installation. We
recommend a maximum distance of 10m from the power
supply to the electromagnetic locks (to prevent volt
drop). If the distance is greater, then make sure you have
increased the cross section of the cable to compensate.
General Advice
The 2 parts of the architectural housing are designed to
be surface mounted on the door and frame, where they
should be parallel when the door is closed. If there is a
rebate, then it will be necessary to pack out the lower
part to be parallel to the other (Aluminium rail spacer,
Ref: REO). You can also use the PRP800 (Reinforcement
section) or ALMA (Aluminium Cable tray) to reinforce the
housing mounting.
Handle (BO600RP)
You must secure the handle with the 2 screws which
comes with the retrofi t housing.
3
cdvigroup.com
EN
BO600RP - BO600RH
Vertical & Horizontal retrofi t housing
INSTALLATION MANUAL
BO600RP
2500MM
BO600RPSTD
2190MM
BO600RP
925 MM
Number of 300Kg magnets
2
2
2
Lock section with cover
1
1
1
Architectural handle with fi xing cover
1
1
1
End caps for handle
2
2
2
End caps for lock section
2
2
2
RAL colour (option)
-
Cut to size (option)
-
3 or 4 magnetic locks (option)
-
-
Monitored (option)
-
3] PACKAGE CONTENTS
Profi led
handle
with end
caps
Profi led
handle
fi xings
cover
Box
section
back-plate
Box
section
cover
End caps
Handle
screw kit
Manual
BO600RP
2500 mm
1
1
1
1
2
1
1
1
BO600RPSTD
2190 mm
1
1
1
1
2
1
1
1
BO600RH 925
mm
1
1
1
1
2
-
1
1
