CDA WCCF0152 Use And Maintenance Download Page 13

24

  |  Instruction Manual

Instruction Manual  |  

25

Bottle storage

To achieve the most effective preservation of your wine for 
the longest time possible and avoiding any waste, position the 
products as shown in the diagrams in this section. In addition, this 
figure illustrates the layout of drawers, baskets and shelves, which 
allows the most efficient use of energy.

Optimal temperature and storage conditions will extend product 
shelf life and optimize electricity consumption. Optimal storage 
temperature should be stated on the food product packaging.

How to connect an alternative plug

If the fitted plug is not suitable for your socket outlet, then it should
be cut off and disposed of safely to avoid possible shock hazard. A
suitable alternative plug of at least 13 Amp rating to BS 1363 should 
be used. 

As the colours of the wires in the mains lead of this appliance may 
not correspond with the coloured markings identifying the termi-
nals in your plug, proceed as follows:-

• The wire which is coloured GREEN and YELLOW must be

connected to the terminal which is marked with the letter (E) or
by the Earth symbol or coloured GREEN and YELLOW.

• The wire which is coloured BLUE must be connected to the

terminal which is marked with the letter (N) or coloured BLACK.

• The wire which is coloured BROWN must be connected to the

terminal which is marked with the letter (L) or coloured RED.

If in doubt regarding the electrical connection of this appliance,
consult a qualified electrician. Do not shorten the supply cable; the
appliance may require removing for servicing.

N.B. Ensure that the plug socket is situated in an easily 

accessible place. 

Summary of Contents for WCCF0152
















Reviews: