18
| Instruction Manual
Instruction Manual |
19
1. With the help of another, open the
door and support it. Loosen and
remove the two screws from the
pivot plate of the lower right hinge,
as per Fig. 6.
2. Move the door away from the wine
cooler slightly and remove the
pivot plate from the bottom of the
door as per Fig. 7. Lower the door
from the upper hinge and place
it somewhere safe where it will
neither cause nor receive damage.
3. Remove the three screws from
both the upper hinge and the
lower hinge, taking care not to let
them fall, as per Fig. 8. Remove the
hinges and place them somewhere
safe in case they are needed in the
future.
4. Remove the plastic caps from the
left hand hinge positions and fit
them into the now empty right hand
hinge holes, as per Fig. 9.
5. Fit the supplied upper left hinge and
lower left hinge to the appliance as per Fig. 10. These are mirror
opposites of their right-handed counterparts.
6. Turn the door around by 180° (upside down) so that the
handle is now on the right (Fig. 11). Insert the pivot plate into the
now-bottom of the door as per Fig. 12.
7. Guide the door onto the upper
hinge pivot and manoeuvre the
lower part of the door and pivot
plate onto the lower hinge. Align
the pivot plate holes with the hinge
plate holes.
8. Reinsert the two screws that you
removed in step 1 and tighten them.
Check that the door sits level with the appliance. If not, the pivot
plate offers some adjustment - loosen the screws you have just
tightened and adjust the door as necessary.