CDA VK970BL, Installation, Use And Maintenance Manual, Page: 21 / 32

21
Care and maintenance
Interior lighting
If the bulb in your appliance should fail, please contact CDA Customer
Care to arrange a service visit. The bulb and appliance must not be
serviced by anyone except a CDA authorised service agent.
IMPORTANT
• Before any cleaning or maintenance is started, the appliance
must be switched off at (and if possible, disconnected from) the
power supply.
• If the oven has been in use, let the oven cavity and the heating
elements cool down before attempting any maintenance.
• Steam cleaners must not be used when cleaning this appliance.
• Once care and maintenance is complete, ensure that all parts
are correctly replaced and dry before using the oven.
• Do not store flammable material in the oven.
• Do not allow grease or food particles to build up around the
door or seal.
Cleaning the oven exterior
As the oven has a decorative and a stainless steel surface, you should
use a non-abrasive cleaner. Any abrasive cleaner (including Cif) will
scratch the surface and could erase the control panel markings.
Cleaning inside of the oven
It is recommended that the interior of the oven be cleaned after
every use using suitable products, especially if any spillage has
occurred. The shelves can be removed and washed by hand or in the
dishwasher.