CDA VK970BL, Installation, Use And Maintenance Manual, Page: 15 / 32

15
adjust the temperature, press the switch parameter sensor until
the temperature is flashing. Use the
and sensors to set the new
temperature. This can be done at any time.
Changing the microwave power
The microwave power will be set automatically to 300W. To adjust
the power, press the switch parameter sensor until the microwave
power is flashing and then use the
and sensors to set the new
power level. This can be set at either 100W, 300W, 450W or 700W.
This can be done at any time.
Pausing or stopping a function
To pause a function at any point, press the stop sensor .
To cancel a function, press the stop sensor again.
To resume cooking, press the start sensor .
Defrost functions
Use the defrost function sensor to select from the following
programmes:
• d01 - meat, poultry and fish with a weight range of 0.2 to 1.5 kg.
• d02 - bread, cake and fruit with a weight range of 0.1 to 0.5 kg.
• d03 - defrost programme with adjustable time
If using programmes d01 or d02
• With the desired programme selected, press the switch parameter
sensor . Use the and sensors to finely adjust the item’s
weight.