CDA VK970BL, Installation, Use And Maintenance Manual, Page: 10 / 32

10
Before first use
Setting the time
Once connected to the mains power supply, the time display will flash
‘00.00’. Use the
and sensors to set the current time between
00.00 and 23:59. Each press of either sensor will adjust the time in 1
minute increments. Holding the sensor will adjust the time in 10 minute
increments. Touch the symbol, or wait 3 seconds, and the time
shall be set.
To change the set time
With the oven on standby, press and hold the sensor for
approximately 3 seconds. There should be a beep and the time
display should flash. Set the time as per the above step.
Cleaning the manufacturing grease
Some grease may reside from the manufacturing process. As
such, the oven should be run with the appliance empty before any
foodstuffs are cooked.
• Touch the heating functions sensor until fan oven is selected
• Touch the switch parameter sensor and then use the plus
and minus parameter selectors to set the temperature to 230°C.
• Touch the sensor. Touch the plus and minus parameter
selectors to set the cooking time to 60 minutes.
• Touch the start sensor .
Cleaning the accessories
Remove, clean and dry the turntable, wire racks and glass tray before
using them for the first time.