23
When correctly installed ensure that there is a gap of 4 mm minimum
between the sides of the oven and adjacent furniture doors.
How to install your oven
You will need the housing area in fig. 6 to fit your oven correctly.
The oven is designed to fit into a cabinet of 600 mm width. The oven
can be built in or built under the kitchen units, but you must ensure
that it is properly ventilated. In the diagram below the built-in oven
is ventilated by means of a space at the top of the kitchen cabinet.
There are many other methods of ventilating your oven - consult a
qualified engineer for advice.
Lift the oven carefully into position on the shelf, taking care NOT to
lift it by the door handle. If you open the oven door, you will see 4
screw holes, 2 on each side of the oven (image S fig. 6). The oven
should then
be secured to
the housing by
securing screws
into these holes.
Remember the
housing should
not be free
standing but
be secured to
the wall and/
or adjacent
fittings.
Fig. 6
40
564
600
600
560
564
595
595
547
554
20
S
