Bonding the AFX to your Blackmagic Pocket 4K/6K Cinema Camera.
Before you can use the AFX to control your camera for the first time, you must first
perform the initial bonding process.
To initiate this process, switch your camera on before booting the AFX, navigate to the
Bluetooth control page of its
SETUP
menu and ensure that Bluetooth is set to
ON
.
When the AFX boots with the Pocket 4K or Pocket 6K variants set as its
AFX Control
Type,
it will scan for the camera and automatically connect to it when it finds it.
Your camera will display a PIN number to be entered and the AFX will invoke its PIN entry
screen below.
Use the
A
button on the AFX to increase the value of the number to match the first one in
the requested PIN, then press the
B
button to move to the next number and repeat the
process until you match all six numbers. Finally, move to the OK field and press the
A
button to submit the PIN after which you should see a confirmation message on the
camera screen and the AFX will reboot and you will be able to control your camera.
If you make a mistake, simply wait for the AFX to reboot and the camera will display a new
PIN for you to try again. This bonding process is only performed the very first time you
connect to your camera and all subsequent connections will be automatically authorised.
AFX USER GUIDE
WWW.CDATEK.COM
7
FIRST LAUNCH - P4K/P6K Cameras Only
