CDA-TEK AFX User Manual Download Page 28

Page: 28 / 41

Setting up and using the Nucleus Nano Wheel

When the Tilta Focus Wheel is connected to the AFX, it provides all of the same

MANUAL

FOCUS

capability of the

R1 Controller

in all modes but with the additional benefit of

providing a more ergonomic experience.

To use the Tilta Focus Wheel with the AFX, it must have its

BLUETOOTH

mode set to

and this is done by holding down the

triangle on the wheel to enter the configuration

menu, followed by navigating to the

BLUETOOTH

entry, double pressing the

triangle

again and then pressing the

DOWN

triangle to toggle it to

As the Tilta Focus Wheel does not store the Bluetooth mode setting on power off, you
must switch it to

prior to using it with the AFX again if you have powered the wheel

down in the meantime.

Once connected you are able to use the Focus Wheel to manually control the entire focus
range of the attached lens as well as use its

REC

button to start and stop recording on the

camera if you are using the Pocket 4K or Pocket 6K camera.

The

REC

button status on the Focus Wheel will also be updated automatically by the AFX

should you put the camera into or out of record directly on the camera or from the AFX
itself.

An additional option that is available is to use the

REC

button of the Focus Wheel to

toggle

AF-C

mode between

and

OFF

and this option is selected in the main

SETUP

MENU.

As the Focus Wheel works in absolute mode, the AFX features a special update mode to
consolidate the difference between the wheel’s physical position and the focus point
generated by an

event from the AFX.

For example, if the wheel is being used to manually focus the lens and is at 25% of its
travel and you activate

AF-S

to move focus and that point is now 70% of the focus travel

there would be a sharp jump back to the 25% position as soon as you touch the wheel
again.

To counteract this, after an

event, the focus wheel will only resume control of the focus

when it has been moved to match its physical position to the new focus position.

In order to avoid any interference between the AFX controlling the Tilta focus motors,
please ensure that the

RF CHANNEL

that you have set on the focus wheel is different to

any that you have set on motors that you are using with the AFX.

AFX USER GUIDE

WWW.CDATEK.COM

OPTIONS - TILTA FOCUS WHEEL

Summary of Contents for AFX










































Search results

Summary of Contents for AFX

Reviews:

Related manuals for AFX

Brands by name

Popular brands

CDA-TEK AFX, User Manual

Search results

Summary of Contents for AFX

Reviews:

Related manuals for AFX

Brands by name

Popular brands