CCTV tester PRO
User
’
s Manual
Page.18
.
Brightness: Setting the brightness of OSD menu and background.(0~7)
Address search: off / on Open or close the PTZ address search Menu.
a. Press
or
key to move the parameter we want to change.
b. Press
or
to change the value.
c. Press ENTER to save the change or press RETURN key to give up the change.
3.9 PTZ address scanning
Search up the ID of PTZ camera.
Note:
Please isolate the PTZ camera with other PTZ cameras before searching up. Otherwise all the
PTZ cameras in the same system will pan at the same time.
Press
keys to “Device setting” menu:
Press
key to confirm after change “Address search:”
to “on”, which add address scan sub-menu. Press
to switch the sub-menu as illustrated:
(
Note:
The system returns to “OFF” after shutdown, and the
scan sub-menu closes automatically. Set “ON” again for next
use.)
Press
key to set: protocol, communication port,
communication rate, make them same as the PTZ camera
Press
or
key, the address values is constantly on the rise or decreas e.
NEAR: The tester will search up the ID quickly and continuously(from 1 to 256). When the ID
is searched, the PTZ camera will pan right. At this time, please press any key to stop
searching up.
FAR: The tester will search up the ID quickly and continuously(from 256 to 1). When the
ID is searched, the PTZ camera will pan left. At this time, please press any key to
