CCTV tester PRO
User
’
s Manual
Page.15
.
Call preset-98
—
Run frame Scan
Call preset-99
—
Run Auto scan
PTZ continuing rotate test
PTZ continuing rotate test is used to test whether the “PTZ rotate” is normal. Press and hold the
direction key (e.g.
or
). The PTZ start rotating. Press the "power" key one time, then
release the direction key. PTZ will rotate continuously. Press any direction key afterwards will stop
the rotating.This function is used to test whether the “PTZ rotate” is normal. The PTZ may have
problem when rotates to some particular position,like not rotating smoothly or get stuck. The
install worker could judge whether the PTZ has problem by observing the PTZ .
3.4. Video Setting
User can customize the brightness, contrast and saturation of the LCD according to the using
environment , the CCTV tester auto display the format(PAL/NTSC) of video input, and analysis
the input video signal level.
a.
Press the
or
key to select the parameter which we want to change the value.
b.
Press the
or
key to change the value. Press ENTER key to save the change
or press RETUR key to give up the change
c.
The Video Format and Video Level will be displayed in the lower portion of the screen. If
there is no video signal at the Video IN port of the CCTV TesterPRO, the type of NTSC or
PAL , and Video Level will not be displayed.
