CCTV tester PRO
User
’
s Manual
Page.16
.
Depending on the type of camera connected to the CCTV testerPRO, the Video “Format: “ will
automatically change between NTSC and PAL, and the Video Level will automatically change
between IRE (Institute of Radio Engineers) and mV. NTSC signals measured in IRE units, PAL
signals measured in mV.
The Video Level should be within the indicated range. Levels that are too low will result in a
dim picture with reduced dynamic range. A Video Level that is too high will result in washed
out pictures with decreased. The CCTV testerPRO will display “Normal” when video levels are
100
0mV±20%
, “Exceed” or “Weak” will be displayed when video level out of 100
0mV±20%.
3.5. Colorbar generator
(Output video at any mode)
Output or receive seven different forms of video color bar to test
monitor, video cable or other equipment.
a.
Press the
or
key to select the parameter which
we want to change the value.
b.
Press the
or
key to change the value.
c.
Press ENTER key to save the change or press RETURN key to give up the change
3. 6 Cable Tester
Test LAN cable or telephone cable.
Connect LAN cable or telephone cable with the CCTV testerPRO and cable tester. And then the
connecting status, cable type and the sequence of wires will be displayed, as well as the serial
number of the cable tester kit
