CCTV tester PRO
User
’
s Manual
Page.14
.
Tips: Press
or
key to accelerate the value changing.
The way of calling the OSD menu and preset of the PTZ camera may vary with control systems
from different manufacturers. Please read the operation manual of control system manufacturer
for details. The way of calling OSD provided for reference is calling preset-64.
a.
Move the yellow cursor to “PTZ controller” to enter PTZ controller mode
b.
Press SET key to enter PTZ controller sub-menu. Press
or
key to move
the yellow cursor to “Go PS”,
c.
Press
or
key to select the preset number 64, and then press ENTER key to
call OSD menu of the PTZ controller.
OSD Menu of Dome (For reference only)
MAIN MENU
1. DISPLAY SETUP
2. CAMERA SETUP
3. CONTROL SETUP
4. CAMERA MASK SET
5. PROGRAM
6. PAL CAMERA
7. CAM DEFAULT SET
8. DOME RESET
9. EXIT
MAIN MENU
1. Display configuration
2. Set camera parameters.
3. Set PTZ controlling
4. Set privacy mask
5. Set auto-running functions
6. PAL/NTSC Switch
7. Restore the default settings
8. Reset the dome
9. Exit the main menu
Operate auto-running functions by calling preset position(effective for some brands of
PTZ camera)
Call preset-33
—
Open Auto-flip function
Call preset-34
—
Reset zero point of PTZ camera
Call preset-64
—
Enter the main menu of the PTZ camera
Call preset-95
—
Enter the main menu of the PTZ camera or stop the PATTERN recording.
Call preset-96
—
Run pattern-1
Call preset-97
—
Run preset tour-1
