6
RESYNCHRONIZE SENSORS
Press the
[ SENSOR / WI-FI ]
key once for the console to enter sensor Synchronization mode, and the
console will re-register all the sensors that have already been registered to the it before . i .e . the console will
not lose the connection of the sensors that you’d paired up before .
CHANGING BATTERIES AND MANUAL PAIRING OF SENSOR
Whenever you changed the batteries of the wireless thermo-hygro or 5-In-1 weather sensor,
re-synchronization must be done manually .
1 . Change all the batteries to new ones in the sensor .
2 . Press
[ SENSOR / WI-FI ]
key on the console to enter sensor synchronization mode .
3 . Press
[ RESET ]
key on the wireless thermo-hygro or 5-In-1 weather sensor .
SYNCHRONIZING ADDITIONAL WIRELESS SENSOR(S) (OPTIONAL)
The console can support up to 7 additional wireless sensors .
1 . Press the
[ SENSOR / WI-FI ]
key once on the console to enter synchronization mode .
2 . Press the
[ RESET ]
key on the new sensor, and wait for a few minutes for the new sensor
to paired to the console .
NOTE:
- Channel number of the thermo-hygro sensor must not be duplicated among the sensors . Please refer to
“
INSTALL WIRELESS THERMO-HYGRO SENSOR
” for details
-
This console can support diff erent type of additional wireless sensor, e.g. soil moisture and pool sensor. If
you would like to pair up additional sensors, please check with your retailer for more detail .
POINTING THE WIRELESS 5-IN-1 SENSOR TO SOUTH
The outdoor 5-In-1 sensor is calibrated to point to North for the maximum accuracy . However, for the user's
convenience (e .g . users in the Southern hemisphere), it is possible to use the sensor with the wind vane
pointing to South .
1 . Install the 5-In-1 wireless sensor with its wind meter end pointing to South . (Please refer to
INSTALLATION OF THE WIRELESS SENSOR
section for mounting details)
2 . Select "S' in hemisphere section of the setup UI setup page . (Please refer to
SETUP THE
WEATHER SERVER CONNECTION
section for setup details)
3 . Press
Apply
icon to confi rm and exit.
NOTE:
Changing the hemisphere setting will automatically switch the direction of the moon phase on the display .
CREATE WEATHER SERVER ACCOUNT & SETUP WI-FI CONNECTION
The console can upload weather data to WUnderground and / or Weathercloud through WI-FI router, you
can follow the step below to setup your device .
NOTE:
The Weather Underground and Weathercloud website are subjected to change without notice .
CREATE WEATHER UNDERGROUND ACCOUNT
1 . In
https://www.wunderground.com
click the "
Join
" on the top right corner to open the
registration page . Follow the instructions to create your account .
NOTE:
Use the valid email address to register your account .
