22
WIRELESS 5-IN-1 SENSOR MAINTENANCE
REPLACE THE WIND VANE
Unscrew and remove the wind
vane for replacement
REPLACE THE WIND CUP
1 . Unscrew and remove the
top cap
2 . Remove the wind cup for
replacement
CLEANING THE RAIN COLLECTOR
1 . Rotate the rain collector by turning
it 30°anti-clockwise .
2 . Gently remove the rain collector .
3 .Clean and remove any debris or
insects .
4 .Install the collector when it is clean
and fully dried .
CLEANING HYGRO-THERMO
SENSOR
1 . Remove the 2 screws at the
bottom of the radiation shield .
2 . Gently pull out the shield .
3 . Carefully remove any dirt or
insects on the sensor and
ventilation fan (do not let the
sensors inside get wet) .
4 .Clean the shield with water to
remove any dirt or insects .
5 .Install all the parts back when
they are clean and fully dried .
TROUBLESHOOT
Problems
Solution
5-In-1 wireless sensor
is intermittent or no
connection
1 . Make sure the sensor is within the transmission range
2 . If it still not work, reset the sensor and resynchronize with
console .
Wireless thermo-hygro
sensor is intermittent or no
connection
1 . Make sure the sensor is within the transmission range
2 . Make sure the channel displayed match to the channel selection
on sensor
3 . If it still not work, reset the sensor and resynchronize with
console .
No WI-FI connection
1 . Check for WI-FI symbol on the display, it should be alway on .
2 . Make sure you connect to 2 .4G band but not 5G band of your
WI-FI router .
Data not reporting to
Wunderground .com or
weathercloud .net
1 . Ensure your Station ID and Station Key are correct .
2 . Ensure the date and time is correct on the tablet . If incorrect,
you may be reporting old data, not real time data .
3 . Ensure your time zone is set properly . If incorrect, you may be
reporting old data, not real time data .
Wunderground Precip .
Accum. Total graph offset
1 hour reset time, during
summer daylight saving
time
1 . Ensure the time zone of the device on Wunderground set
correctly
2 . Ensure the time zone and DST on your console are correct .
3 . If you located your station out of US time zone region in
Wunderground, the DST will be invalid . To solve this issue,
please turn off the DST function in console.
Rainfall is not correct
1 . Please keep the rain collector clean
2 . Make sure the tipping bucket inside can work smoothly
Temperature reading too
high in the day time
1 .
Place the sensor in open area and at least 1.5m off the ground.
2 . Make certain that the sensor array is not too close to heat
generating sources or strictures, such as buildings, pavement,
walls or air conditioning units .
