ENGLISH
13
7.
Problem solving
In case the lamp doesn’t turn on:
➢
Check that the lamp is properly
wired to the supply voltage.
➢
Check that polarity wiring has
been carried out correctly.
Please contact CCEA’S Technical support
service in case the lamp is defective
CCEA Technical Support Service
Phone: +39 0444 572083
8.
Replacing the LED light
source
The outstanding lifetime of the LED
light source, over 60.000 hours, makes
it unnecessary to replace the PCB LED
if the lamp is properly installed and
used following the instructions in this
manual.
Please
contact
CCEA
’s
Technical Support service - or your
Reseller
–
in case the replacement of
the PCB LED is needed for any defects
not covered by the warranty.
9.
Product Maintenance and
Cleaning
Switch off the power supply before
any installation, maintenance or
reparation procedures.
This product is maintenance-free.
➢
Lamp cleaning to be carried out
only after it has been switched off
and surfaces have cooled down.
➢
Carefully rinse the lamp surface
with a mild cleanser and then
wipe off using a soft cloth in order
to avoid scoring it.
Leakage of liquid will cause damage
to the lamp.
➢
The lamp cannot be installed in
humid environments
10.
Repairs
All material damages caused by
poorly executed repairs may damage
the lamp
➢
All repairs must be carried out by
the manufacturer or by qualified
technicians.
➢
Only
use spare parts having been
approved by the manufacturer.
WARNING
NOTICE
NOTICE
Problem solving and Repair
