background image

 

                                                                             ENGLISH 

 

 

16 
 

15.

 

 Declaration of Conformity 

 
 

Attached MIZAR_user_manual_EN_23-08-21 

 

C.C.E.A. SRL, via Piave, 2 - 36077 Altavilla Vicentina (VI), Italy 

 VAT and Tax number 02374040240 

hereby  declares  that  the  light  equipment  named  MIZAR 

  to  which  the  present  Declaration  of 

Conformity is related - was manufactured by CCEA SRL in accordance with the following Directives: 
2014/35/UE  on  Low  Voltage  Equipment  Safety  and  the  Directive  of  Electromagnetic  Compatibility 
89/336/CEE (EMC) 2014/30/UE. The unit complies in particular with the following regulations: 
llowing regulations: 

 

Directives

  

        

 

 
 

 

Harmonized Standards 

CEI EN 60598-

1 “

Lighting equipment. Part 1: General 

instructions and tests”

 

CEI EN 60598-2-4 

“Lighting equipment part 2: particular requirements –

 part 4 Portable 

general-

purpose luminaries”.

 

CEI EN 62031 

“LED modules for general lighting. Safety specifications”.

 

CEI EN  62384 

“DC or AC supplied 

electronic control gear for LED modules. Performance 

requirements”.

 

 

This  is  a  standard  product  manufactured  following  a  detailed  production  schedule  ensuring  that 
inspections and destructive tests were carried out, for a safe, functional and sustainable product to be 
delivered. 
C.C.E.A. SRL disclaims any responsibility resulting from tampering and/or wrong use of the device. 
 
 

Date: ___________________________ 
Week of production: ______________ 
Product code: ___________________

  

 

 

Declaration of Comformity 
 

C . C . E . A .   s r l  

Via Piave, 2 

36077 Altavilla Vicentina (VI) - Italy 

Tel.  ++39 0444 572083 
Fax. ++39 0444 572337 

E-mail[email protected] 

www.ccealights.com

 

Machinery Directive 2006/42/EC  
Low Voltage Directive 2014/35/EU  
EMC Directive 2014/30/EU

 

 

Summary of Contents for MIZAR Series

















Reviews: