CBX LEOTIE, User Manual, Page: 7 / 20

7
1
Take the frame out of the box. Release the fold lock
a
and open the frame, lifting upwards by
holding the handlebar. When you hear a clicking noise, the frame is assembled.
2
Take the front wheels out of the box. Place the wheel axle
b
into the fitting. The assembly is
complete when you hear a clicking noise.
11
The adapter for branded carseats (Cybex Silver Aton, CBX Aton, Maxi-Cosi Cabrio Fix) marked with
„R“ is placed on the right side of the frame, the adapter marked with „L“ is placed on the left side.
You should hear a „click“ noise when installed correctly. Check that the adapter has been attached
properly before you put the carseat on top.
If using car seat 0+ Shima you do not need the adapter from frame.
3
In order to release the wheel, press the quick release button c and take the wheel off.
7
To unlock, press the upper part of the pedal
e
.
4
Assembling the rear wheels: fit the rear wheels by pushing the wheel shafts into the fitting in the
direction of the arrow. The clicking sound indicates that the assembly is complete.
5
To release, pull the button d upwards and pull the wheel out in the direction of the arrow.
INSTRUCTIONS
Front wheels must be locked when in use on uneven ground. You can do so by using the wheel
lock button.
8
To lock the rear wheels, press the lower part of the brake pedal e down.
6
For maximum manoeuvrability in the city, the wheels can swivel.
9
Before folding the buggy, make sure the seatunit is in a sitting position with the backrest in up-
right position. Then press the fold button to fold the buggy.
10
Important — Keep these instructions for future reference.
Compatible with PURE, LUX, FLEX, Carrycot, CYBEX Aton Silver, ATON & Maxi Cosi Cabrio Fix (using
Adapter), SHIMA for BIMISI.
Warnings, safety instructions, maintenance, disposal and guarantee can be found in the warnings
booklet.
EN