FIK19R Rimless flipIT ® by SMaRTdesks® www.smartdesks.com ©2012 CbT Supply, Inc. 800-770-7042
7
4. Install gas spring cylinder
use a flat blade screwdriver to remove the locking hubs, then press
the black barrel end of the cylinder onto the arm mounting post.
Leave the silver shaft end uninstalled.
Press the locking hub into place to finish the installation.
5. Install VESA mount
use three Euroscrews
to install the VESa
bracket.
Most monitors use
the second from the
top position for bal-
anced operation.
your monitor should
clear the rest by 1/2”
or less. Choose the
set of pilot holes that
fits your monitor.
Check and set the microgap
Inspect the microgap to
make sure it is even on all
sides. Set this in position
now by tightening the
short bracket all the way.
Refer to step 2, simple arm.
Summary of Contents for flipIT RIMLESS
Page 12: ......
