Making the lid flush
with the top
The sides will probably be very close, because
you used the work surface as a reference for
the pivots, but the weight of the monitor
compresses the pad in its own way that can’t
be simulated on the initial installation.
use 3/8” open end wrench and 5/32” hex
key on the rest with the monitor installed.
Install the gas spring, silver shaft to the long bracket.
Remove locking hub, press end onto post, press in locking
hub. Install monitor.
Then remove the monitor to get access to the side adjustments. If necessary, adjust
the left and right pivots using the 5/32” hex key and 7/16” open end wrench.
800 770 7042
shaping conferencing & education
sm
FIK19R Rimless flipIT ® by SMaRTdesks® www.smartdesks.com ©2012 CbT Supply, Inc. 800-770-7042
11
Summary of Contents for flipIT RIMLESS
Page 12: ......
