4
FIK19R Rimless flipIT ® by SMaRTdesks® www.smartdesks.com ©2012 CbT Supply, Inc. 800-770-7042
1. Place flipIT lid into cut-out.
Keyboard installs here
Mounting holes “point”
to keyboard edge
It is easiest to assemble on a table prepared
with a furniture blanket to protect the ther-
mofoil surface. Place the flipIT lid into the
cut-out with the VESa bracket mounting
holes “pointing” to the side with curved edge,
where the keyboard tray installs.
on flipIT lid, use a #2 Phillips to break the thermofoil
pilot holes for easier installation.
2. Install simple arm
using two 1/2” Phillips drive wood screws,
install the short bracket loosely so the micro-
gap can later be adjusted. The bracket slots
are oblong for this purpose.
Install the pivot into
the short bracket,
finger tight, so it
can be adjusted for
depth.
Press a nylon bushing
into the simple arm
so the spacer washer
is between the
moving parts.
Summary of Contents for flipIT RIMLESS
Page 12: ......
