6
FIK19R Rimless flipIT ® by SMaRTdesks® www.smartdesks.com ©2012 CbT Supply, Inc. 800-770-7042
Press the nylon bushing into the post arm so
the bushing spacer works between the
moving parts.
Insert the pivot into the nylon bushing and
insert the threaded part into the back slot of
the long bracket.
Spin on hex nut and
lock washer, then
fully tighten the pivot
using 7/16” open end
wrench and 5/32” hex
key. This uses the work
surface as a reference
to set the lid flush with
the top.
note that this adjust-
ment may need to be
refined after the moni-
tor is installed.
using 3 Euroscrews
each, install the arm
assemblies to the
flipIT lid.
Summary of Contents for flipIT RIMLESS
Page 12: ......
