877-4-SAFETY
|
Fax: 940-382-9435
A Group CBS Company
CBS
Safe
®
Arc
7.0 Specifications
MECHANICAL
Holding magnets:
Two magnets, each rated @ 55.1 lbs force, 12,600 Gauss.
Linear Actuators:
12VDC rated.
Force:
Linear actuators rated for approximately 12lbs
Typical operating
Depending on the distance from the plunger to the breaker button, it may take one to two
speed:
seconds for the actuator to operate the breaker.
Projected life:
20,000 operations
ELECTRICAL
Operating voltage:
12 volts DC
Fuse:
3 amp, quick-blow, AGC-3
Power supply:
8 AA alkaline disposable batteries. When used properly, one set of batteries should yield
over 700 operations.
Control Cable:
30 feet in length (9.1 meters), 5-conductor, extra-flexible, PUR insulation
Controller:
Requires two-hand operation. The ‘enable’ button must be depressed while operating the
OPEN or CLOSE buttons.
A programmable micro-controller manages control inputs, motor functions, monitors and
limits mechanical travel and performs timing functions to protect the actuators in a stalled
condition.
An intelligent ‘H-bridge’ motor driver provides start/stop/braking motor functions. The
H-bridge has integral thermal shutdown protection.
