8.
Slide the CH6643
9.
After mounting, reconnect the coaxial cable input and Ethernet connection.
10.
Plug the power cord into the +12VDC connector on the gateway and the
electrical outlet.
11.
Route the cables to avoid any safety h
Wall Mounting Template
Setting Up Internet Access
After installing the
retrieve an IP address for your computer’s network interf
following options:
•
Retrieve the statically defined IP address and DNS address
•
Automatically retrieve the IP address using the Network DHCP server
CH6643E down until it stops against the top of the keyhole opening.
After mounting, reconnect the coaxial cable input and Ethernet connection.
Plug the power cord into the +12VDC connector on the gateway and the
electrical outlet.
Route the cables to avoid any safety hazards.
Figure 1 Wall Mounting Template
Setting Up Internet Access
After installing the CH6643E, check that you can connect to the Internet. You can
retrieve an IP address for your computer’s network interface using one of the
Retrieve the statically defined IP address and DNS address
Automatically retrieve the IP address using the Network DHCP server
15
until it stops against the top of the keyhole opening.
After mounting, reconnect the coaxial cable input and Ethernet connection.
Plug the power cord into the +12VDC connector on the gateway and the
E, check that you can connect to the Internet. You can
ace using one of the
Automatically retrieve the IP address using the Network DHCP server
Summary of Contents for CH6643
Page 26: ...26...
