12
System Requirements
Your computer must meet the following minimum requirements:
•
Computer with Pentium
©
class or better processor
•
Windows XP, Windows 7, Windows 8, Macintosh, or UNIX operating system with
available operating system CD-ROM
•
Any web browser, such as Microsoft Internet Explorer, Netscape Navigator
®
, or
Mozilla
®
Firefox
®
Connecting the CH6643E
Before starting, be sure the computer is turned on and the CH6643E power cord is
unplugged.
1.
Connect one end of the coaxial cable to the cable outlet or splitter.
2.
Connect the other end of the coaxial cable to the Cable connector on the
CH6643E. Hand-tighten the connectors to avoid damaging them.
3.
Plug the power cord into the Power port on the CH6643E.
4.
Plug the other end of the power cord into an electrical wall outlet.
This automatically powers on the gateway. You do not need to unplug the
gateway when it is not in use. The first time you plug in the CH6643E, allow it 5
to 30 minutes to find and lock on the appropriate communications channels.
5.
Plug the other end of the telephone cord of a single or two-line telephone
into the TEL 1/2 port on the rear of the CH6643E.
6.
Plug the telephone cord of a single or two-line telephone into the telephone.
7.
(optional step) Plug USB memory stick or hard-disk drive into USB port on
CH6643E.
8.
Connect the Ethernet cable to the Ethernet port on the computer, and
connect the other end of the Ethernet cable to the Ethernet port on the
gateway.
9.
For a second telephone, plug the telephone wire of a single-line telephone
into the TEL 2 port on the rear of the CH6643E.
Summary of Contents for CH6643
Page 26: ...26...
