CBM CMP-10, Manual

Page: 5 / 23

CITIZEN CMP-10 5
· Do not use or store the printer in locations exposed to fire, moisture, direct sunshine
or near heaters or thermal devices where the prescribed operating temperature and
humidity are not met, or in a places exposed to oil leaks, iron powder, or dust. The
device may brake, emit smoke, or catch fire.
· Install the printer on a flat, stable desks or tables free from vibrations.
· Do not use any sharp-pointed objects, such as a pens, to touch the operation panel
of the printer.
· Do not use the device near radio or TV receivers. Do not share the power from a
common socket together with radio or TV receivers because this may cause recep-
tion problems.
· Use the printer only with the specified power supply, voltage and frequency.
· Confirm that the mains socket, used for the connection, has sufficient capacity.
· Avoid connecting the power cable to a mains socket shared by other devices or
extending the wiring too fa - the cable may catch fire. Do not step on or apply
excessive force (pull) to the cable.
· Never connect the grounding cable (frame ground) to a gas pipe beacuse of the
danger of explosion. When connecting or disconnecting the grounding cable, be
sure to disconnect the power cable and the power plug from the mains socket.
· When connecting/disconnecting the cables, be sure to turn off the power first,
including the connected side, and then connect/disconnect them, holding the plug
and the connector.Pulling the cable itself cam seriously damage it.
·If a reverse-polarity connection is made, internal elements may be broken or a mating
device may be adversely affected.
· Use a shielding wire or twisted pair for a signal line, in order to minimize noise
effects. Do not route the cable too long or connect it to a noisy device. Connection
to noisy devices can cause erroneous printing due to corrupt data.
· Use the printer in locations where the mains socket is close at hand so that you can
easily disconnect the power plug from it and shut off the power.
· When the printer will be kept in storage for longer periods of time, or during transpor
tation, unplug all cables from it and remove the paper roll.
i
PRECAUTIONS DURING INSTALLATION